top of page

TAURUS AMPLIFICATION

Ampsguitar specialist shop Stomp-Head France 

Taurus products are made in Poland, not far from Mayones et  quality is there once again. Ampsguitar shop was one of the first resellers of Stomp-head in France as soon as it was officially released in 2011!

I only offer products for guitars, Stomp-Head, cabinets and effects to fully satisfy the needs of the guitarist. A brand that really innovates to discover absolutely, a test is essential!!

 

THE "Stomp-head" RANGE is divided into two families made up of 6 analog and analog amp models + tube preamp. These compact amps in "pedal" format will be the ideal partner for musicians who tour and who often travel by train or plane: the amp fits in a laptop bag for a weight varying between 1.8 kg and 3.1 kg depending on the models. They can be plugged directly into mixing consoles, which adds even more convenience!

The power is there, it's even "too much" in most cases . 

Suivant de près le fonctionnement et le rendement "live" de mes partenaires artistes qui jouent sur Taurus    (Nelson, Olive and Mike on tour with Mat Bastard , Sebastien Garsia / SGguitarschool, Jag, Alex / Octane) we will be  able to advise you on the ideal amp for your stage and studio needs!

​

SH2 HG + Classic models out of stock are available within 15 days 

For other models within 3 weeks in general.

The majority of Stomp-heads are only made to order,

because almost no stock in advance at Taurus.

Stomp-Head 6 CE

SH 6 (04).jpg

  • Power stage efficiency: 200Watt

  • Power output selector: 90W, 40W, 20W, 12W

  • Speaker impedance auto detection: 4.8 and 16ohm

  • Tubes: 12AX7

  • 2 channels: CLEAN+CRUNCH and LEAD

  • 5 footswitches: CLEAN, CRUNCH, DRIVE, REVERB, BOOST

    CONTROLS: 

  • BASS, MIDDLE, TREBLE, PRESENCE, CRUNCH + VOLUME, DRIVE + VOLUME, BOOST, REVERB 

  • Input GAIN boost (+6dB switch)

  • MUTE

  • RESONANCE – switch increasing the sound in the resonance range of the loudspeaker

  • Serial EFFECT LOOP

  • LINE OUTPUT with Speaker Simulation. Allows send linear signal with simulation (PIN) or without simulation (RING) or both simultaneously

  • EXTERNAL CONTROLLER INPUT for channel selector and BOOST

  • Voltage selector 230V/50Hz or 115V/60Hz

  • Dimensions: (H x W x D) 90 x 330 x 205mm

  • Weight: 2.45kg

  • Rate :640 euros  (on order)

   Stomp-head 2 HG

Taurus SH 8 Qube classic
En stock

Stomp-head 2 HG:

Hyper compact and formidable for Metal, but not only .....

 

  • Power output - 60 Watt / 4ohm, 8ohm,16ohm

  • Power brake to 25Watt

  • Auto-detection speakers impedance

  • Tubes: 12AX7

  • 2 channels: CLEAN and LEAD

  • 2 footswitches: CHANNEL [Clean/Lead], MUTE

  • CLEAN channel controls: BASS, MIDDLE, TREBLE, CRUNCH, VOLUME

  • LEAD channel controls: DRIVE, BASS, MIDDLE, TREBLE, VOLUME 

  • PRESENCE mode switch 

  • Input GAIN boost

  • Serial effect loop

  • LINE OUTPUT with speaker simulation

  • Additional input for external channel selector/controller

  • Power output selector

  • Dimensions: [High x Long x Width] 80 x 290 x 190 mm

  • Weight: 1.8kg

  •  

    Price : 460 euros  (Available on order)

    ​

     

Stomp-head 2 CL

SH8-QLONE

Stomp-head 2 CL: Country / Funk / Blues / Rock / Hard rock / Fusion, play all these styles without any worries with this little devil!

 

  • Power output - 60 Watt / 4ohm, 8ohm,16ohm

  • Power brake to 25Watt

  • Auto-detection speakers impedance

  • Tubes: 12AX7

  • 2 channels: CLEAN and LEAD

  • 2 footswitches: CHANNEL [Clean/Lead], MUTE

  • CLEAN channel controls: BASS, MIDDLE, TREBLE, CRUNCH, VOLUME

  • LEAD channel controls: DRIVE, BASS, MIDDLE, TREBLE, VOLUME 

  • PRESENCE mode switch 

  • Input GAIN boost

  • Serial effect loop

  • LINE OUTPUT with speaker simulation

  • Additional input for external channel selector/controller

  • Power output selector

  • Dimensions: [High x Long x Width] 80 x 290 x 190 mm

  • Weight: 1.8kg

  • Price : discontinued product.

Stomp-head 5 CE

SH-5-2020
Taurus-Stomp-Head-5CE. back pannel
In stock !!!

  • The super complete stomp-head with 3 channels

  • Clean + Classic Lead + High Gain Lead + boost 

  • Power output - 90 Watt / 4ohm, 8ohm,16ohm

  • Power brake to 40Watt

  • Speakers impedance auto detection

  • Tubes: 12AX7

  • 3 channels: CLEAN, Classic LEAD, High Gain LEAD

  • 5 footswitches: CHANNEL 1-2-3, BOOST, MUTE

  • 1-CLEAN CHANNEL controls:  BASS, MIDDLE, TREBLE, GAIN, VOLUME / switches: MID-RANGE  BRIGHT

  • 2-CLASSIC LEAD CHANNEL controls:  DRIVE, BASS, MIDDLE, TREBLE, VOLUME / switches: MID-RANGE  BRIGHT-DARK

  • 3-HIGH GAIN LEAD CHANNEL controls:  DRIVE, BASS, MIDDLE, TREBLE, VOLUME / switches: MID-RANGE, BRIGHT-DARK

  • MASTER CHANNEL  contlols:  NOISE GATE, BOOST, MASTER

  • Input GAIN (+6dB switch)

  • BOOST: fast access to two different volume levels

  • Serial effect loop

  • LINE OUTPUT with speaker simulation
    The ability to send the linear signal  with or without simulation or both at the same time

  • INPUT for external channel selector/controller

  • MIX-MODE  all three of the amps channels can be mixed and used simultaneously

  • Power Output selector

  • Dimensions: [H x W x Dl] 90 x 330 x 205 mm

  • Weight: 2.65kg

  •  

    Rate :special price  700 euros  

Available immediately!

Stomp-head 8 Clean - News 2023

Taurus SH 8 Clean 01.jpg
EN Stock !!!

Stomp-head 2 HG:

Hyper compact and formidable for Metal, but not only .....

 

  • Power output - 60 Watt / 4ohm, 8ohm,16ohm

  • Power brake to 25Watt

  • Auto-detection speakers impedance

  • Tubes: 12AX7

  • 2 channels: CLEAN and LEAD

  • 2 footswitches: CHANNEL [Clean/Lead], MUTE

  • CLEAN channel controls: BASS, MIDDLE, TREBLE, CRUNCH, VOLUME

  • LEAD channel controls: DRIVE, BASS, MIDDLE, TREBLE, VOLUME 

  • PRESENCE mode switch 

  • Input GAIN boost

  • Serial effect loop

  • LINE OUTPUT with speaker simulation

  • Additional input for external channel selector/controller

  • Power output selector

  • Dimensions: [High x Long x Width] 80 x 290 x 190 mm

  • Weight: 1.8kg

  •  

    Price : 460 euros  (Available on order)

    ​

     

Stomp-head SH 7 APOGEE 

SH 7 Apogee.jpg
SH 7 Apogee. 02.jpg
SH 7 APOGEE

  • Power stage efficiency: 200Watt

  • Power output selector: 90W, 40W, 20W, 12W

  • Speaker impedance auto detection: 4.8 and 16ohm

  • Tubes: 12AX7

  • 2 channels: CLEAN+CRUNCH and LEAD

  • 5 footswitches: CLEAN, CRUNCH, DRIVE, REVERB, BOOST

    CHANNEL controls (CLEAN & LEAD): 

  • GAIN, BASS, MIDDLE, MID-RANGE switch, TREBLE, PRESENCE, VOLUME 

    MASTER controls: 

  • SERVO – analog enhancer level with SERVO GAIN switch

  • BOOST - access to set two different volume levels

  • REVERB

  • NOISE GATE

  • MUTE

  • input GAIN boost (+6dB switch)

  • RESONANCE – switch increasing the sound in the resonance range of the loudspeaker

  • Serial EFFECT LOOP

  • LINE OUTPUT with Speaker Simulation. Allows send linear signal with simulation (PIN) or without simulation (RING) or both simultaneously

  • EXTERNAL CONTROLLER INPUT for channel selector and BOOST

  • Voltage selector 230V/50Hz or 115V/60Hz

  • Dimensions: (H x W x D) 90 x 330 x 205mm

  • PRICE 2022 =  860 euros (on order)

bottom of page